Inverters shutting off 07:44 - 07:45 any ideas?
asked
inverter turning off
What does the GX report in notifications?
What does vebus errors and alarms widgets show?
We really need more than a one liner to offer guidance on a system.
Detail your setup, config. Provide charts for usage around the time of faults.
Otherwise it is just crystal ball time, and its battery is flat.
We have checked the logs and we cannot seem to find anything obvious as to what might cause this, site have reported that the drop doesn't seem to follow any pattern and we were only able to see this drop as we changed the refresh rate to every minute.
It looks like an overload but there is no warnings.
Again, please detail your system and setup. You are giving a fraction of the info anyone will need.
The system will restart on an overload, but without supporting data for grid, battery, loads etc it could be a red Herring.
Is this a parallel system? 3-phase?
How is it wired?
Any modifications?
Help us to help you, else the topic will just be closed.
Hi Nick, this is a 3phase system, 20x5KWH batteries wired to 3x15KVA inverters, no over loads detected, site loads all below 12.5K per phase, the drops don't seem to be consistent with any patterns, I can add you to the unit so you can view all the data.
