This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My ev charger from victron just arrived - and it was working correctly until i connected it to the internet and it upgraded to 1.29 version - then after upgrade there is problem with screen . it is booting over and over with information on screen like "System data error". Was trying to update it 2 times with C25 version and C24 version but nothing helps.
Hi, when restarting, is it trying to update the screen firmware?
Normal with power off/on or with restart after updating ? or soft reboot from app- i can check then
HI same here tried all the tricks suggested.
Keeps showing error, all else works fine
Vrm portal id c0619ab55993
WoudseHoevePower
Appreciate the help.
Greetings Richard
HI, see my answer here:https://community.victronenergy.com/questions/271305/ev-charging-station-system-data-error-after-upgrad.html?childToView=312180#answer-312180
for issues, you can contact me.
Lucian
Thanks, I again tried a power cycle and for some reason it started the update of the lcd and finished successfully.
Problem solved...
Richard
It is probably not solved. I recommend you to arrange for that driver.
The parameters can vary based on temperature, so you probably tried when it was colder. But as you wish.
Lucian
