question

vocks avatar image
vocks asked

AC disconnected on easy solar plus 2 GX

My easy solar 2 disconnected the ac loads and gave the message "AC disconnected". And now it only runs on battery's though the AC input is connected to the shore and also shows on the display there is a 230v on L1. (and measured it)

what can be the cause and solution?



Multiplus-IIEasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@vocks

Are you using virtual switch?

Are line and neutral from shore the correct way around?

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

vocks avatar image vocks commented ·

I’m not using a virtual switch that i know of.

Only installed an ess assistant about a year ago

And this installation has been running for more than a year and without me changing the line in cables.

I did have “float limit alarms” before.

Would a virtual switch stay active when triggered ?



0 Likes 0 ·
Show more comments