This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I hav the Victron Color controller monitoring my Multiplus, BMV and Blue Solar controller in my RV. I would like to add tank monitoring through the color controller. Do I need to purchase a whole new tank monitor system, or is there a way to use the existing resistant based monitor wires? Is there any documentation or resources for adding tank monitors to the Victron Color Controller?
I am using different types of Remote tank monitoring devices. But I think Level Pro Sentinel Remote tank monitoring device is the best device in the market. Know about this device you can visit Icon Process Controls website. You can also contact with them via phone: 905-469-9283 or email: sales@iconprocon.com.
CCGX doesn't have resistive inputs, so these have to be converted to Ve.CAN using a device: https://www.victronenergy.com/accessories/ve-can-resistive-tank-sender-adapter
VenusGX does have these inputs, so these can be connected directly.
Hope that's helpful.
Thanks, that does help. However it looks as if I would need one adapter for each tank. Since the Venus appears to support three tank inputs at almost the same price as the adapter, could I use a Venus to connect the tank sensors to then daisy chain to display the result in my Color Controller?
I don't think Venus and CCGX can be "daisy-chained". I believe it's either or. CCGX however runs mainly on open-source software, so it's theoretically possible to hook up the sensors to say Arduino, and then send information to CCGX custom script to display on the dashboard. I haven't done it myself, but this is theoretically possible. Just throwing it into the mix - still, the easiest plug-and-play option is the rather expensive adapter....
Hi, nice idea! Venus GX and CCGx can be, sort ofC daisychained. Not easy, requires you to do software work, but should be possible:
Thanks for the note. I don’t think I’m going to start work on the code just yet, however, I will be interested to hear what your future thoughts might be. I like having the interface of the CCGX, but I would really like to add tank sensors for my RV for all in one monitoring, and remote monitoring. Maybe I’ll just wait a year and see where Victron goes with this.
Yes, most probably waiting will help, a colleague from R&D pointed me to an improvement that’s coming that will also make them ‘daisy chain’ when it comes to tank inputs. Over the canbus.
I just did some Googling and I cannot find the VE.Can tank sender adapter anywhere for much less than $400, and I'd need three of them to do all of my tanks.
Why are these so expensive? Is there a cheaper option? I also noticed that some models of the SeeLevel II tank monitors support "RV-C" which is a CAN Bus based communication protocol. Would the CCGX be able to read data from a RV-C network since it is CAN Bus based?
Thanks for the reply.
I would certainly consider waiting and buying the Venus GX if that was my only option. But that would require me to stick with "resistive" type tank monitors. (Which will require me to actually cut holes in my tanks to add them).
I understand if RV-C isn't working today but it is just CAN Bus and the CCGX already speaks CAN Bus. So implementing RV-C should be a simple software update to program the CCGX to decipher the specific CAN messages being sent by the SeeLevel. In general that seems like a much more obvious long term solution. RV-C is a pretty standard protocol in RVs and Victron equipment is used a lot in RVs so it seems like something Victron should at least consider supporting, especially since you already support CAN Bus. Or at least offer a way to add support for custom CAN bus messages in CCGX so we can DIY.
Hi Irwin, I noticed that you posted a new wuestion about this; good idea. Can you repost above answer/comment to me there? Then lets discuss there; thanks!
@stevemullins Just another idea... get Venus GX, an android stereo and forget about CCGX... See pic. (Speaking from experience - and reasonably happy with it).
Cool! So that FM radio on steroids had a browser?
Soon you’ll be able to run this then:
I’m thinking of replacing the ccgx with the Venus. Just not sure I have to get the stereo as well.
saw this device
it works over USB to the CCGX
https://www.victronenergy.com/panel-systems-remote-monitoring/gx-tank-140
Yes the tank 140 will work on the CCGX once it is updated to version 2.89.
