question

Guilhem Preti avatar image
Guilhem Preti asked

How to connect Bluesolar DUO with Smartshunt

Dear All,

I have connected a Bluesolar DUO on a starter battery and a service battery,

I use a smartshunt to monitor the SoC.

Is this diagram correct ?

screenshot-2024-06-19-at-235018.png

Thanks in advance for your advice,

Best.

Guilhem


SmartShuntBlueSolar PWM
screenshot-2024-06-19-at-235018.png (479.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

How to wire a BMV/SmartShunt question no.1324786
This already has been asked sooooo many times.

The manual is pretty clear about the wiring of the shunt.

ONLY the battery is on one side and EVERYTHING else is on the other side

1719848981970.png

https://www.victronenergy.com/media/pg/SmartShunt/en/installation.html#UUID-a10646e3-b62d-00ab-0abb-7f807edfb62f


Yes your diagram is correct.


1719848981970.png (47.5 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guilhem Preti avatar image Guilhem Preti commented ·

Thank you for your message.


I know it's been asked many time but the details about charging the Starter battery from Bluesolar DUO is not shown on this one :



1719848981970.png


I just wanted to double check, :)


Best Regards.

Guilhem



0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

SmartShunt Product Page

SmartShunt Installation Manual

SmartShunt Quick Installation Guide

SmartShunt Datasheet