Hi. So I have installed successfully and have been using my BMV-702 on my house bank which consisted of 8 6v batteries in parallel/series. I used to have a separate bank for the inverter of 4 6v batteries in parallel/series but have decided to create one large bank. Now that I have done so the BMV-702 will only read the current output of the DC systems but not the output of the inverter or the charging input of the inverter/charger.
Right now the inverter has a positive and negative off the bank directly to the inverter and the main battery ground goes to the shunt and then out of the shunt to the main dc ground buss bar. How would I wire the shunt so that the inverter and house dc loads are both monitored?