question

You are right, did not recognize this until now... and now I see only this... :D

Well, maybe this will be changed after your remark...

@Alex Pescaru You must be an end-user. I see these little things too, and there's more..

Battery tile now tabulated vertically as of a few days ago. I'd prefer 'Pylontech' to show as the header, like in Device List. I know what V, A and degC mean without headers, like some other tiles. The degC actually comes from the Multiplus, not the managed battery. And the A expressed to 2 decimal places, the second never populates.

Generator tile has a runtime value that never changes.

AC Load tile has duplicate W, but could use V and A. The Hz there is good, I know what that means too.

And the decimal point in low-value W (in all tiles now I think) is dumb. With DC calcs being done to 0.1A accuracy my W steps in 5W blocks. The DC Power tile is calculated by difference, might look ok, but the actual value there (with dc shut down) is 0W. I don't need to see accumulated inaccuracies of W to any decimal place.

The SOC's 1 decimal is good though, mightn't be of much use with Pylons, but it is with the Victron shunts. VictronConnect removed that long ago, a backward step.

This stuff needs tidying up. I love my VRM, but it doesn't give the impression of being 'technically correct' in some aspects.

I dont agree that the word box needs to be there unnecessary clutter. Also the battery symbol is enough to know it relates to the battery.

The ESS reason is there. You have a little down arrow so probably minimised in your screenshot. I assume you are not on mobile like i am.

Battery state changes - idle charging discharging etc.

Some more.....

About battery zone, depending on the size of the web explorer window.

Happening during resizing.

Hi how come I can’t see my individual AC PV arrays both have there own ET112 but I only see the total amoth I would like to see what each array is producing at a given time to see capability of the smaller array.