This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good evening,
yesterday afternoon I installed my new "SmartSolar MPPT 150/70 Tr VE.Can" with 2x3 solarpanels of 310Wp. It works very well, but when I activated Bluetooth on my Sony Xperia E dual, now devices where shown. The VictronConnect App is running fine.
Android Version 4.1.1 (the Xperia E Dual has no newer version)
VictronConnect Version 5.8 (can not install the 5.11 because of a parse error)
Thanks for your help
Michelle
Hi Michelle,
The best thing to do would be to find another phone model from a friend, and see if the MPPT appears on their phone.
If that is working fine, then that could help isolate the issue to your phone, and not the MPPT.
Unfortunately support is no longer provided for Android 4.x, so if there is a specific issue with this combination, I don't think there is much that can be done from Victron's end.
Thankyou for your fast answer.
I will see tonight with my business partner.
What options do I have to configure the SmartSolar, WE USE ONLY Debian GNU/Linux?
I have to adjust the several charging settings to my SOPzS Batteries and also the Relais which should switch on a 24V 1000W Water Heating Element, if the Solarcharger goes into FLOAD.
Thanks
Michelle
Hello Guy,
I got some strange thing!
The Samsung Galaxy S6 from Kärt hast VictronConnect 5.11 installed (!!!) which we have NEVER done!
I can see in the Bluetooth Manager that the "SmartSolar HQ1918MFYGS" is there I can pair/unpair it.
If I run the VictronConnect App, NOTHING is shown.
My Sony Xperia E Dual which run Android 4.1.1 show also the SmartSolar, but also here with VictronConnect 5.8 nothing is shown in the device list.
More infos:
I have just tried to install the VictronConnect v5.12beta2 APK on the Samsung Galaxy S6 with Android 7.0 and it show an error message, that it can not parse the APK file because it is corrupt.
I just downloaded it with Crome directly from the Victron website.
Any suggestions?
Have a nice Sunday
Michelle
The Samsung Galaxy S6 with Android 7.0 recognise the SmartSolar in the Bluetooth manager, but the VictronConnect App 5.11 can not see it.
I have downloaded the version 5.12beta2 but if I try to install it, there is a ParseError.
Any ideas?
Hi Michelle,
The Sony is running Android 4.1.1, the minimum supported version is 4.3 for VC v5.8 and 5.0 for VC 5.11)
I have updated the documentation to make that clearer that this is now unsupported, and unlikely to work.
With the Samsung S6, please try and remove the device from the paired devices list, grant permissions to location services, make sure that location services are enabled, and then try opening VictronConnect again.
Good morning Guy,
First I removed the v5.11 from the Galaxy S6, then I downloaded the v5.12beta2 directly from the Website under Debian GNU/Linux 9.8 using Firefox, copied the file over the USB cable to the Galaxy S6 and tried to install it manually.
The problem persist. I get always a "parsing error" and "APK corrupt" message.
Can it be, that there is a problem with Android 7.0?
Thanks and nice Friday
Michelle
Is this error different or related to the original question?
Please keep beta software issues in the modifications space, and only ask about stable release versions in the normal Q&A.
Summary for Samsung Galaxy S6 with Android 7:
VictronConnect 5.11:
BluetoothManager show detected device and I leafe it as it is (unpaired).
Starting VictronConnect APP and scan for devices does not find anything.
VictronConnect 5.12beta2:
Downloaded with Crome on the Telephone directly from the Victron Website and installing from the download directory give the "Parse Error".
Downloaded on my Debian GNU/Linux 9.8 Workstation, conected he Samsung Galaxy S6 and uploaded it and then tried to install it directly from the Downloads folder give also a "Parse Error" message.
I am long term OpenSource (more then 28 years) and GNU/Linux (more then 20 years) Developer and I think, I am not stupid. Looking into the Android SDK, it seems, there are MANY Blackholes where nobody know, what the sourcecodes do...
I have no clue about Android APP development, but I know, that Android has a bunch of ClosedSource software inside which does strange things. Could be also, that Samsung is modifying something (Customised Android Version) which produce the error.
Have a nice weekend
Michelle
Let’s stick with the 5.11 issues for now, if you want to help with the beta testing, please create a new post in the modifications space.
Can you find another phone model from a friend, and see if the MPPT appears in VictronConnect on their phone, and then report back on that.
On your phone which isn’t working properly, please create a service report and post it here - https://www.victronenergy.com/live/victronconnect:start#how_to_create_a_victronconnect_service_report
