Hello
How to clean up Alarm logs in the VRM protal?
:-)
asked
Alarm logs clean up in the VRM portal
Could you provide some more insight as to why this is important to you?
I’ll pass on the feature request.
I passed on the request, but there are no plans to add the feature at this stage.
There is other work underway to improve the alarms system in VRM.
Hello,
we would also be interested if there is another way to clear them, except deleting the installation and set up a new one.
Thanks
Well, if you have a loooong alarm log, either because you experimented with something or because something was wrong but is OK now, you want to have it clear before you send the customer the invitation... without deleting the installation and setting everything up again, with the desired graphs and their position on the site, for 3 BMV, 3 MPPT, color control, energy meters etc...
Hi @DanielW,
Can you please explain why is this feature important to you?
I would also like to be able to clear the error logs on the VRM portal. Old errors from bringing up the system are distracting and unhelpful now that I'm done.
it would realy be nice to clear the alarm log. it should be a Standard feature.
Any news on the resetting of the error alarms yet
I was hoping they would fix this up in the update, why would I want to see alarm logs from two years ago or ones that cleared in under a minute. I find it unfathomable you can not clear them. It is one think that really irks me
I'll mention it again next meeting I am in with the VRM team.
For now the method to clear the alarms on a new system commissioning is to delete the installation in VRM and it will start fresh.
I don't think there will be a way to completely clear them (aside from deleting the installation), but I see the ability to archive old alarms out of sight from the log as useful.
Are you in the alarm logs so often that this is priority over other new VRM features for you though?
Ich habe ebenfalls den Wunsch das mein log-Verzeichnis leer ist. Wo liegen denn die Daten? Wenn die lokal liegen, reicht womöglich die Nennung des Pfades und der Zugriff über SSH mit root. Alles ist möglich .
