question

John Rushworth avatar image
John Rushworth asked

CCGX - How to Customize the logo on the Boat & Motorhome page

  1. This is both a question and an answer, as I discovered the answer searching/reading the Victron blog - and I thought others here might find it useful.


Customize the logo on the Boat & Motorhome page

As shown in the image above, you can now upload your own logo onto the Boat & Motorhome page. Great for motorhome builders, boat builders, and other OEMs that want to add their own touch to the system.

How to change the logo

Using this address as a template: http://[ip-here]/logo.php (inserting your device’s IP address between the square brackets) type that address into a connected browser – the IP address can be found by going to Settings > Ethernet or Wifi. From there you will see the screen above. Choose an image file from your computer. That’s it! ….but don’t forget to re-boot the GX device.

CCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Gerardo avatar image
Gerardo answered ·

Hi John.

I am trying to change the logo of my CCGX. I connected it via Ethernet and got access to the "change logo" option. However, after rebooting my device, I cannot see any change.

In the browser says the logo was changed successfully but I cannot see it displayed in the CCGX.

Do you have any advice I can test?

Thanks

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

John Rushworth avatar image John Rushworth ♦♦ commented ·

Hi.

So as you say, you have got the logo per the manual:

https://www.victronenergy.com/live/ccgx:start#customize_the_logo_on_the_boat_motorhome_page

Now and assuming you have the latest firmware as of this reply:

https://www.victronenergy.com/blog/2019/12/20/venus-os-v2-41-fixing-byd-communications-and-more/

I don’t have a CCGX handy but now I believe you need to enable boat/motorhome display in settings. I don’t think you had to previously. Find that and enable and reboot if you haven’t already.


0 Likes 0 ·
peter-ehry avatar image peter-ehry commented ·
I have the same problem. Logo change is confirmed but on the display nothing changed. Boat and motorhome display is enabled. Has anybody any idea how to fix this?
0 Likes 0 ·