This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, can I use a plain VE.direct cable to connect a Multiplus Compact to a smartshunt? The camper currently has the Multiplus Compact built in and I am building a victron system around it, with a smartshunt being the "heart" to monitor power in/out, Battery charge state,...
I am planning to use the Bluetooth smart network to connect the smartshunt and an orion charger and lay a cable to the inverter (its a bit further away)
Hi @PyroRider ,
I don't at all understand why you would want to try to do that connection setup.
Maybe you could expand your post to elaborate on your end goal? You may get more, or better informed answers.
However as far as I am personally aware there isn't anyway to interface the two products in that manner as the smartshunt uses a VE.Direct port (which can go to VE.Direct or USB) and the Multiplus compact uses VE.Bus. I am not aware of any Victron cable means of interconnecting the two other than via the Cerbo S-GX or GX.
My goal is to be able to use/monitor the system only via victronconnect on a mobile, without a cerbo, venus or control panel. Only parts are a Multiplus Compact, a SmartSolar Mppt, an Orion DC-DC charger and a smartshunt as I do not have the space or power available to mount and run a cerbo gx
No, that's not possible; not only because neither of them have the appropriate ports to directly communicate with each other, but also because they don't communicate that way in any case. You'd need a Cerbo or other GX device between them for there to be any comms possible. For more information please see the SmartShunt user manual and the MultiPlus Compact user manual.
