question

cstenger avatar image
cstenger asked

Orion-XS and Globallink520

I installed the Orion-XS today. But it doesn’t show up in the Globallink520 Smart Devices (unlike the Orion-Tr, that did) though instant readout is enabled.


Anyone familiar with this issue yet?

globallinkorion xs
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @cstenger,

The GlobalLink 520 does not yet support the Orion XS.

Work is now under way.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cstenger avatar image cstenger commented ·
Any update when it’s to be expected?
0 Likes 0 ·
No timeline but I have just raised it again with the VRM dev team, thanks for the reminder and apologies for the delay in getting it done.
0 Likes 0 ·
cstenger avatar image
cstenger answered ·

Now it sees the SmartSense at the Starter Battery and transmits data once in a while for a few seconds, but this "unknown" device doesn't even disappear when I turn instant readout off at the Orion. So it can't be it, right?


3a774c9a-b188-4299-8f2f-c97ac5997184-1-102-o.jpeg


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Globalink Product page

Globalink Online Manual

Additional resources still need to be added for this topic

Orion XS product page

Orion XS datasheet

Orion XS manual (html)

__________