Hi all,
i'm struggling to get my solar set up to charge the batterie of my battery bank.
The solar panels give the right output voltage of about 37-something volts but 0 Amps and Watts.
I've tried resetting and re-detecting the system on the EasySolar unit to no avail.
Also it gives no errors in the notifications section of the menu.
I reckon it's something relatively simple I've been omitting but I just can't get my head around it...
Any ideas and help would be appreciated.
Also let me know if you would require some more information if needed.
Here are the specifications of my set up build in on a MAN 4X4 overland camper truck.
5 x Canadian Solar CS6K-295MS panels (1475W in total).
One set of 2 panels and one set of 3 panels.
On the picture the panels are not wired up yet but you'll get the idea.
4x12v Victron Deep Cycle 220 Ah Gel Batteries in set up 24V / 440Ah configuration.
Here are the readings from the Connect app
