question

solarsean avatar image
solarsean asked

Lowering Charge Efficiency for Aging Batteries

Is there any rules of thumb as to how much to lower the charge efficiency factor when your batteries start to show signs of aging/degradation? The BMV has been reading incorrectly when the SOC nears a full charge, and I heard we need to lower the efficiency factor to get it dialed back in.

If it's currently at 96%, do we want to just decrease it in increments of 10%? That would be starting at 86% and then moving from there. Any input people have from managing this setting on older batteries would be great.

charger
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

Hi Sean,

You could look in the history of the BMV and get a rough guide from the discharged energy / charged energy.

0 Likes 0 ·
1 Answer
karlmr avatar image
karlmr answered ·

I'm also keen to know what the best way is to treat older batteries showings signs of reduced capacity. Is it just by reducing the charge efficiency or should I be adjusting the rated capacity down?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

JohnC avatar image JohnC ♦ commented ·

If it's really reduced capacity, then change that. True loss of charge efficiency would normally express itself as heat, if not just boiling off electrolyte.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic