With the new v10.39 update,
my inverter is hidden when it is off. This is how we normally turn it on, but now it is blank. Is there a way to show it even when it is in the off state? If I turn it on from a different screen It displays like normal.
asked
Gui Mods v10.39 how do I SHOW multi tile if no inverter on?
it would be nice if you could switch the new function on/off as the Screen in a small DC System eg a Campervan it looks strange without the inverter and the small clock
Exactly, it is also the easiest way to change the status of a multiplus when using a Victron Touch 50 or 70. If I leave the Multiplus on "charge only" it remains visible but also uses a few watts constantly. For now, I have gone back to v10.38.
v10.40 was just released, and it also does not update this and has the same problem. I'm going back to v10.38 for now.
i have the same problem with 10.44
The missing Multi tile should obviously not be happening. It works on my system so I'm going to need more information. Type of Multi and logs (see SetupHelper readme for how to get to them if you don't have ssh access). Also firmware version.
I made a few changes to hopefully make the Multi tile appear when it should. v10.45 is available now. Please let me know how this works out.
for me it is still gone, but as i said i have no Multi at all. Do you want still want the log?
