I have a SmartSolar MPPT 7515 talking to a BMV-712 over Bluetooth. In the VictronConnect app, the MPPT says this:
VE.Smart networking This product is configured for VE.Smart networking and is receiving the following data from the network. Battery voltage Battery temperature
Why not SoC, too? I'd like to control the load output based on SoC rather than plain voltage.
They're also both VE.Direct connected to a CCGX, which is getting SoC from the BMV, but apparently not feeding it to the MPPT either.
It occurs to me that I could use the relay on the BMV to drive a load switch, which would accomplish the same thing. But it'd be nice, consider this a feature request, if the MPPT could do it too. (And as others have pointed out, this would allow the MPPT to measure consumption.)