This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
Since the last update at 11th Sept the VictronConnect app won't start, but before that it worked as expected.
The splash screen comes up then it exits.
I was suggested to remove and reinstall the app and reboot my phone but these did not solve the problem.
Phone is a Huaweii P8 Lite.
Any suggestions?
If you need logs or anything, just tell me where do I find them and I'll send it.
Thank you in advance!
Best regards,
Lazlotabor
Update:
Android 5 devices with a 64bit CPU will experience a crash at startup due to an issue in the libraries we use to develop VictronConnect. This is not expected to be fixed. A workaround for this issue is to manually install the VictronConnect APK that can be downloaded in the software section.
----
Hello @Lazlotabor,
Sorry I didn't read the part of your post where you said that you have already tried to reinstall VictronConnect.
We have tested VictronConnect v5.10 on a P8 Lite and it works fine. Which Android version is your phone running, Android 5 or 6? Our is running Android 6.
So if your phone is still running Android 5 you can try to update it to Android 6.
If for some reason updating to Android 6 is not possible, you can download VictronConnect 5.8 from our downloads page: https://www.victronenergy.com/support-and-downloads/software
Hello @jperez (Victron Energy Staff),
I got Android 5.0.1.
I downloaded V5.8 of Victron Connect and it just works fine for me.
Thank you for the suggestion!
Is anyone else having a problem with this?
Also @Lazlotabor, we have just released another version 5.10. It may not yet be in the App Store, but please update to that and report back if the problem still persists.
Hey. Yes, the same problem with version 5.9 of the app on an old Hudl2 tablet running Android 5.1. Apart from the usual connection and firmware update issues, up until a week or so ago the app had been working fine for more than a year. Now as characterised above, the splash screen comes up for a few seconds and then disappears, and that's it - nothing more.
There's no Internet access where my solar controller is installed and it'll be a few days until I'm back out there and able to test v5.10, if it has updated on my tablet by then.
I think support for Lollipop (android 5) has been discontinued. https://www.victronenergy.com/live/victronconnect:beta
Hi @Guy Stewart (Victron Community Manager),
I tried to update and even reinstall the whole app, but it did not solve the issue.
I downloaded v5.8 of Victron Connect and it works fine tho. The problem will be with my Android version (5.0.1) as @jperez (Victron Energy Staff) suggested.
Thank you for the quick response!
Hello,
Try to uninstall VictronConnect, reboot the phone and then install VictronConnect again.
Yes, saved settings will be lost when uninstalling. What you can do is continue using v5.8 by downloading it from our downloads page: https://www.victronenergy.com/support-and-downloads/software
That's a pity. Thanks for the link, though. :)
Edit: I don't know what mechanism you use to push firmware updates to my solar controller. Does sticking with v5.8 mean that I won't get future firmware updates?
I haven't been paying attention recently - has the Bluetooth protocol been open-sourced yet? That'd be the best solution, in my opinion. :)
Same problem for me. With lg g4 phone and 5.1 Android. It worked with precedent version.
I can't down load the app from playstore and my phone won't let me download from here as a 'security' risk. Help please. Arran
Please provide more details. Which phone model and Android version? If you download VictronConnect from our website you need to enable "Install from unknown sources" option in your phone settings. If is the browser who is blocking the download try using a different one.
