question

paul1980 avatar image
paul1980 asked

Using Cerbo GX with Multiplus 2 GX

I am looking to see what is required to connect a multiplus 2 gx to a cerbo gx.

I had a multiplus 2 gx already and then decided to get a cerbo so I can add functionality such as monitoring my water tanks in the motorhome. I am assuming that I can't have 2 GX devices connected together but I'm not 100%. I read somewhere else that you can unplug the gx device inside the multiplus but wanted to see if that was needed. Also if that is the case, how do I identify what I need to disconnect?

Cheers,

Paul

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Duivert NL avatar image
Duivert NL answered ·

Yes you must disconnect the gx card in order for it to work, see this post for explanation

https://community.victronenergy.com/questions/147860/disconnect-internal-gx-card-on-multiplus-ii-gx.html

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

paul1980 avatar image paul1980 commented ·
Thanks. So just to clarify, is the GX card the card the display ribbon cable is coming from? My Multiplus looks slightly different internally to the ones pictured.

Cheers,

Paul


0 Likes 0 ·
Show more comments