question

nixklaus avatar image
nixklaus asked

Error: remote installation does not seem to have a running Node Red service.

Hello

I can‘t solve this problem on my Cerbo GX. I have it over VRM.

Can anyone help me please?


cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Have you enabled node red in the large image?

Tried a reboot?

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nixklaus avatar image nixklaus commented ·

Thanks for the answer.

Venus large version enabled, disabled, enabled, disabled, enabled

New firmware, old firmware, new firmware
reboot, reboot, reboot
Protected mode for nodered, fullmode, disabled, enabled
No success.

I don't know what to do.


0 Likes 0 ·
nickdb avatar image nickdb ♦♦ nixklaus commented ·

There is a process for removing it (stop, delete folder, change back to small image, then revert to large image again).

That may help.

Else, just follow the Cerbo reset process, this should now be in the docs as well.

Maybe, also check the GX hasn't run out of space.

1 Like 1 ·
nixklaus avatar image nixklaus nickdb ♦♦ commented ·
Thank you very much for your answer. How I can delete a folder in a cerbo gx?

And wich folder I have to delete?


0 Likes 0 ·
Show more comments