I have a Multiplus-II GX with a Smartsolar MPPT 250/100 connected via VE-Direct cable. Now, I was expanding the system with a second solar array (smaller, using a Smartsolar MPPT 150/45) but the second MTTP only has VEDirect connection. The inverter only has ONE Vedirect connector... I tryed to connect the 250/100 via VE-CAN but with no success.. initually it was recognized but then.... not... :|
What would be the best sugestion ? note that I am considering buying a second inverter (not GX to increase inverting power for the house...
At this moments all comments are most welcome.
Thanks to all!