possible to deactivate "Solar charge current control" ?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

4711austria asked May 26, '24

Hi

is it possible within a ESS mit BMS via Can to deactivate the setting.

DC coupled feed in to to grid is active.

Thx

cerbo gx rs450

bildschirmfoto-2024-05-26-um-112020.png (84.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-05-26T09:53:44Z

Alexandra answered · May 26 at 09:53 AM

Limit charge current is not active during feed in even with a can battery.

4

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4711austria commented · May 26 at 10:16 AM

Thx, but why is the RS450 not powering all time then, and should this setting show Off?

I have a second ESS installation without an RS450 and there it shows off.

0 ·

Show more comments