This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I currently have a Multi RS working with a cerbo gx. Standard setup and all working well.
I'm looking to buy a 15kva quattro soon.
My question is can they both run alongside each other on the same cerbo gx? I'm not looking to parrallell the ac out but they will share the DC and cerbo.
I would just like to keep the Multi rs to do other bits like the water heater. The quattro will run the rest of the house.
Many thanks!
Dave
No. Only one inverter or parallel group of identical inverters per GX device.
I have 2 inverters in series, first - non Victron, second - MultiRS
I put em24 meter and system works good
I have no monitoring for non Victron one, but I don't need it.
For the second Victron MultiPlus-II - I have another Cerbo
Depends on what you need from monitoring in your setup.
Frankly, I don't see why not if they were assigned different NADs or are on different interfaces...
If that is possible or not... Remains to be seen.
One would be controlled by the GX and the other could have monitoring only.
So yes both can be connected.
I read somewhere that the additional one has to be connected via MK3? But only stats of the original one are shown on GX and therefore on VRM?
