This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I am struggling to understand why I can’t get correct data 
from VRM. I can get correct data via from its app and through solar log base but not with VRM. I have attached my system layout (based on my understanding) and a screenshot from VRM. I would appreciae and value if someone could help me work through this issue. 
doesnt the fronius sends its data already to the cerbo over IP?
looks like your measuring the pv twice (over netwerk and with et 340)
if you devide the 14199 by 2 then your measurement to grid and to house are about right with the said 500w as your last post stated
@Daniël Boekel (Victron Energy Staff)
Hi Daniel,
I wanted to see if you had any insight regarding my issue. Or could you direct me to someone who would.
Thank you
hi whats the problem, values in vrm look correct
6465W to grid plus7670W to loads plus 20W to battery is 14155W from PV, the difference is cable losses, selfconsumption of inverter(s)
