question

equus-luna avatar image
equus-luna asked

access settings.js for node red on a cerbo gx device.

Hi, I'm trying to get the worldmap to run on dashboard2 in nodered running on a cerbogx device. It keeps saying that is cannot get the worldmap and I am thinking it is because i need to know the httpRoot and this value can be found in the settings.js file. I have a macbook.

My understanding is that the file can be found here: /usr/lib/node_modules/node-red/venus-settings.js but I am not sure what is the best way to access these files on the cerbo gx device from mac. Do I just plug it in and go to file explorer? Is there a better way?

Thanks

cerbo gxNode-RED
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
derrick thomas avatar image
derrick thomas answered ·

Use terminal or putty

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

equus-luna avatar image equus-luna commented ·

Sorry I realize that my bellow statement was best. phrased as a comment:

Thanks so much,

I went into my GX device. Enabled superuser and SSH on LAN. Installed putty.

But I think this is where I am again starting to get lost as I am not a programer by training or very familiar with this type of file accessing. If there are step by step instructions out there or at least a general sense of what to do next I would be very grateful.

Thanks so much for help.

0 Likes 0 ·
Show more comments