We are currently using Multiplus 24/70/3000 series inverters - your product.
I would like to ask the following questions.
1. we want to use a single cable for input and output of the generated power.
Our company is experimenting with renewable energy and would like to use the electricity generated by the engine via your inverter,
We are actually able to generate and use electricity with this experimental equipment.
We would like to use a storage battery or extract electricity from a storage battery. (See attached document).
However, we are not sure how this is achieved with a single power strip. Normally, we believe that if we want to charge electricity to the storage battery, we should use an AC-Input cable, and if we want to use the electricity from the storage battery, we should need an AC-Output cable.
Is it possible to control the function of storing electricity in the storage battery or using electricity from the storage battery with a single power strip?
We would appreciate it if you could tell us.
If possible, we would appreciate it if you could tell us on what page of the specification sheet it is described.