This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hello guys i have a question i have a quattro connected with BSL battery there are difference between the soc of the battery and the state of charge in the quattro and the quattro is not charging good due to the difference between the readings can anyone help please 
Also measure manually on the battery terminals with a meter if what is reported is correct.
On your GX device, make sure BSL (not automatic) is the selected battery monitor.
I also use a Quattro and BSL but with "automatic" selected. That always chooses BSL. Everything works normally.
I don't know how to disable the Quattro/VE.bus SOC.
F.
The Quattro's SOC isn't particularly suited to this type of battery. You should really disable it, so it can have no say in any downstream logic.
What stands out in your pics (1 min apart) is the reported difference between the 52.11V of the BSL and 58.62V of the Quattro. What's happening there?
General BSL stuff.. https://www.victronenergy.com/live/battery_compatibility:bsl
