question

glen-stewart avatar image
glen-stewart asked

Cerbo GX error: VRM Portal ID could not be found

I am attempting to add a Cerbo GX installation to my company VRM account, and getting an error message "The installation with the specified VRM Portal ID or IMEI could not be found." Verified on-site the device IS in communication (using a Victron LTE modem), the firmware on all devices is the latest version, and the VRM Portal ID on the remote console matches the sticker on the side of the unit. Tried to add both thru our VRM account as well as the device. I manage the VRM for my company with over 30 installations, and this is the first I have seen this issue. Any suggestions?

1000000648.jpgpxl-20240506-143608158mp.jpg

cerbo gx
1000000648.jpg (901.2 KiB)
pxl-20240506-143608158mp.jpg (1.9 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

"Last contact ---"

So it never had a connection to the VRM portal.

Verify that you have working internet connection.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

glen-stewart avatar image glen-stewart commented ·
Thank you. This unit was on the VRM previously and in attempting to repair, deleted the installation and reloaded firmware on the GX device. On the menu under the LTE modem shows ONLINE and 4G connection.
0 Likes 0 ·
Show more comments