question

belmont avatar image
belmont asked

parallel battery systems (attention for BYD users !!!)

Can you parallel connect BYD Battery-Box Pro 10 and BYD Battery-Box Premium LVL 15 ?

Both are 48VDC, one is 10kW and other is 15kW but they are different product line?


If not recommended, how would you utilize both battery system on the same site?


Should these have their own inverter/charger like quattro and parallel them on the AC out side?

If I parallel two Victron Quattro, is it fine if I use different power rated ones? One for each battery system, lets say for the 10kW BYD battery would have a 10kVA Quattro and the 15kW BYD battery would have a 15kVA Quattro?


Do I need two Cerbo GX in case I would use two Quattro?

MultiPlus Quattro Inverter ChargerBYD
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

Parallel Victron inverter/chargers requires all AC in/out and DC cables to be connected to a common point and the same length from that point to the units. You can't have separate battery banks. You also must use identical units (same power rating and even down to the specific model version).

Batteries of different size can often be paralleled but it's not the best choice. I can't speak about BYD batteries specifically. Check their documentation.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

belmont avatar image
belmont answered ·

can i connect both battery system in the cerbo gx, will it recognize both ? This case the DC 48V would be on the common busbar. Are there others who use multiple different smart battery systems with one common cerbo gx?


3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kevin Windrem avatar image Kevin Windrem commented ·

The GX device will choose ONE battery system to incorporate into the overall system. Others are shown in the device list only.

The Victron ecosystem assumes one battery bank for the entire system.

There is a third party add-on called Battery Aggregator that will combine multiple batteries and present that to the GX device but I don't know the details.

0 Likes 0 ·
Show more comments