question

geoaid avatar image
geoaid asked

BSL Batteries and Easysolar 48/5000

Hello there! We are planning to install 2 BSL Lithium Batteries 5,12kWh each with Easysolar II 48/5000.

I have a question about this installation.

- Will i need an extra Smart Shunt in order to monitor the SOC of the batteries since there is a BMS on the batteries?

EasySolar All-in-Onebslbatt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Duivert NL avatar image
Duivert NL answered ·

No need for shunt, just follow this guide:

https://www.victronenergy.com/live/battery_compatibility:bsl

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

geoaid avatar image geoaid commented ·

Thank you duivert!

0 Likes 0 ·
Fideri avatar image
Fideri answered ·

@geoaid

@duivert is essentially right but also see this response by Alexandria: https://community.victronenergy.com/questions/256049/bmv-or-simply-bms.html

F.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Fideri avatar image Fideri commented ·

My bad, I meant Alexandra.

0 Likes 0 ·
geoaid avatar image geoaid Fideri commented ·
Thank you Fideri ... what did you did by the way at your installation finally?
0 Likes 0 ·
Fideri avatar image Fideri geoaid commented ·

Finally, no shunt and no complaints yet.

F.

0 Likes 0 ·

Related Resources

Victron & BSLBATT Lithium batteries

Additional resources still need to be added for this topic

EasySolar 1600 product page

EasySolar-II GX 3000 & 5000 product page