question

GRIGORIU avatar image
GRIGORIU asked

Remote ( by VRM) setings control of the RS Multi RS Solar relay

Hi ,

I have a "naive newbie" question. I would like to change the control of the Multi RS solar 6000 switch remotely through VRM and I do not find how.

I can do it locally with victron connect but not from the net.

Can someone give some advice ?

Thaks in advance

Multi RS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ejrossouw avatar image
ejrossouw answered ·

@GRIGORIU You have to enable realtime updates and inverter charger control under settings in VRM to show the controls on the dashboard. It shows at the right hand top as two switches. You can only control the relays of the GX device and not the Multi.

7 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

GRIGORIU avatar image GRIGORIU commented ·

Hi,

Thanks. I enable firmware update with check and install But I do not see inverter charger control ( it is automatically set to external control since I use pylontech's) Or maybe I am wrong with the settings ? Can you provide an image or a menu by submenu path ?

0 Likes 0 ·
Show more comments