This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a system with a single PV inverter, batteries and multiplus 2 and colour control, I have an et112 on the grid incoming and another on the pv inverters output, works great. I have now had another array installed and i dont know how to connect this to the existing system and all diagrams i find only show 1 pv inverter.
does anyone have a diagram they could share please
You can connect it at the same connection as the other pv inverter but all depends on where its connected on the multiplus, ac in or ac out side, and what the pv power and multiplus type is
If on ac out side take care of the 1:1 rule
