Hi! I tried multiple firmware pairings like:
2.33 - 460
2.33 - 433
2.30 - 433
I tried multiple utp cables, but I can't get the multi device to show up.
I have shell access and see something like this, not sure if relevant:
root@canvu500:~# cat /data/var/lib/mk2-dbus/mkxport-ttyUSB0.settings D Multi - Inverter / Charger Multi - AC Input
The vebus values don't appear on dbus. The system has a bms with assitrant installed and digital multi control. With the stock setup I think it managed to see the multi but never since
Any help is really really appreciated.