This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm trying to figure out my battery settings for my new smart shunt, maybe someone can share their settings.
I have two deep cycle lead acid batteries 6 volts each wired and series. The batteries are the Costco golf cart batteries 210ah. The batteries are installed and they travel trailer. I will be charging with a portable 110 watt solar panel, as well as on board charger.
does somebody have the same setup and can share your battery settings?
Thank you for your help,
Brian
Hi @Brian
I've a similar set of GC2 pattern batts, in 8x series (48V). Different brand and rating, but I use this.
This set to sync in Float, and you'll need to adjust the CEF to fine tune it. A start point though, ask again if you need the 'why' answers.. :)
Thank you for your assistance. Just trying to learn what settings should be best.
If the CEF is not set correctly the batteries will say they are at 100% charged when they are not?
Brian
See here. It explains what affects the SOC and synchronisation and how to trouble shoot.
CEF is explained here.
