This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I know we can change the boat and motor home page logo, but I'm looking to change the image that appears when the CCGX first powers on (below). I figured out how to change /opt/color-control/gui/splash.png, but that only shows up once "Starting..." appears late in the boot process. If it's really hard to replace this image, is it possible to turn it off?
Is this question better posed as an issue on github?
Just because I am curious, what happens when you delete/rename it? It should then be "turned off"
I think you are referring to the boat, motorhome screen? Not the boot up/splash screen which I think can be changed for corporate branding or if you have root access and know Linux.
I’m no programmer but I’m sure the folks on Victron dev GitHub lists would know.
I am still looking for "it". I suspect there are actually three splash screens, all set to the same image. One for the bootloader, one for the OS and one for the GUI. /opt/color-control/gui/splash.png is loaded by the GUI. I can't find the other two.
For now I have a line in /data/rcS.local which copies my splash screen from /data over the default in /opt/color-control/gui, so that it persists between firmware updates. I'm running firmware version 2.12(?) and with this setup I get the Victron splash, followed by a mostly white screen, followed again by the Victron splash, followed by my splash coincident with the "Starting..." message.
Hi; indeed, I think, a splash screen is loaded at least two times.
First time its the bootloader:
https://github.com/victronenergy/meta-victronenergy/tree/master/meta-bsp/recipes-bsp/u-boot
You see files in there. But cross compiling u-boot and the replacing it on your device; or in case the splash.bmp is on the target as a file; first mount that partition and then replace it; is for me higher mathematics on which i cant spend time. And the guys that do know @victron are not to spend time on this; sorry.
Last time I think its the gui; and it prints ‘Starting’; i think. And inbetween those two, the kernel might reload it again too.
Best regards. Matthijs
Ps; looks like the ccgx kernel (or at least v4.19 of it, which is not yet deployed) has special code to not touch the framebuffer: so no splashscreen loaded by that.
https://github.com/victronenergy/linux/commit/18ff207012e6af6b3d005297b8e7ef93965bc6dd
Thanks @mvader (Victron Energy Staff). Understood. That's enough into to tell me I may be able to disable the bootloader splash screen via u-boot environment variables, without having to recompile the u-boot. And you've given me a place to look at what the kernel is up to.
Ha! Seems you know more about this then I do; thats good. success & enjoy!
Ps; todays kernel is 3.7. We’ll soon start field testing 4.19.
That upgrade has been a looong process.
https://github.com/victronenergy/meta-victronenergy/tree/master/meta-bsp/recipes-kernel/linux
Well, I have failed to tap into the u-boot console. Thought I might get there through the Serial Console but not having any luck bringing that up. Perhaps my mod to the VE.Direct to USB cable was incorrect? I removed the red and black wires from the PCB and jumpered them to the 0 V and +5 V pins of the USB connector. I'm getting 5V between pins 4 and 1 of the VE.Connect, and the COM port is showing up in Windows, but seeing nothing on my serial monitor when I reboot the CCGX. Any hints what I did wrong?
