question

williet6 avatar image
williet6 asked

BMV fault finding

I have just relocated my shunt, with a new cable. On reconnecting my BMV700 shows no sign of life. The fuse B2 is ok.

How can I determin if the fault lies with the BMV, the cable or the shunt?

fault
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Williet6

Is the display not lighting up? It is most likely the patch cable to the display, if you have checked the fuse in the positive cable and it is ok.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Faults with Victron equipment are best discussed directly with your dealer - this can be formalised with this support request form.