question

rogerhallett99 avatar image
rogerhallett99 asked

Centaur not charging

Just installed a new Centaur 12/30 on two LA banks totalling 300Ah . On applying 120vac the led lights, fan runs but outputs sit at battery voltage only. No charging happening. I’ve checked the wiring and disconnected and reconnected in the correct order according to the manual. No impact.

Any suggestions before I box it up and take it back?

Thanks!

battery chargingchargerfault
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @RogerHallett99

Did you get it to work?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rogerhallett99 avatar image rogerhallett99 commented ·

Hi Daniel,

No I didn’t. Have arranged to return it to the distributor on Friday. Exchanging for a new one. Never worked right out of the box unfortunately. Bit disappointing.

Roger



0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

Faults with Victron equipment are best discussed directly with your dealer - this can be formalised with this support request form.