I am brand new in terms of victron charge controller. Also here I never get used lifepo4 batteries but only gel.
There's so much new thermonology that I don't quite understand, and I'm not very good at technical English.
I bought a smart isolate 100/30. a Victron Energy Smart Battery Sense and 4 pcs 190 ah lifepo4 cells, and am very unsure how to set this in victron connect.
the specifications of the batteries are:
Product Name: Lithium iron phosphate cell
Shell Material ： Aluminum
Rated capacity: 190Ah
Minimum capacity: 190Ah
Internal impedance: 0.1 ~ 0.3mΩ
Nominal voltage: 3.2V
Dimensions (L * W * H): 174 * 54 * 207mm
Weight: 4.0 ± 0.10kg
Recommend Constant Current: 190A (1C)
End-of-Discharge Voltage: 2.5V
Recommend Constant Current: 95A (0.5C)
Charge Voltage: 3.65V
Maximum Pulse Discharging Current ： 528A
Charge Voltage: 3.65V
Max Continuous Discharge Current: 190A (1C)
Cycle life (80% DOD): 4000 cycles
Charging Temperature ： -5 ~ 60 ° C
Discharging Temperature ： -30 ~ 60 ° C
Is there someone who can guide me, this way down to the beginning stage so that I can make this work in my caravan
