There is battery alarm on the screen of Multiplus II GX
According VRM my battery is way above low battery, I measured myself and it was 52.1V while 51.9V shown on the screen of Multiplus. Based on voltage still far away from low battery.
I tried to look earlier questions and noticed that ESS assistent will overrule battery setting in Inverted tab of VEConfigure.
Now how should really set it in order to utilise my battery as much as possible ?
My Redodo battery has been given 47.2V as low battery warning voltage and 43.2V as low shutdown. How do I get those values in use as Inverter tab values are not in used ?
I am a bit confused of used charging modes bulk, absorption and float states which are used in case of lead acid battery.
My setup:
Multiplus II 48V 3000VA GX
Redodo 25.6V 100Ah x2 = 48V Lifepo4 battery. Recommend charging 0.2C = 20A - 0.5C= 50A. Max 100A
Battery cables are 50mm2 quality copper cables, length only like 1.5metres max.
Here is battery logging from last night. A charging session on the middle starting 2am