question

jimmy-henningsson avatar image
jimmy-henningsson asked

multiplus frequency shifting: Older multiplus

Hello All


I have a costumer that have 3 multipluss 48/3000 in a 3 phase system.
The are quite old, so the question is if the still support the frequency shifting because the costumer wants to install additional plants uppstream.

Therefore we need to feed according to this:


1713772042005.png




The Serial number is: PMP483020000 / HQ1348BP1KM
So is this to old to use for this?

//jimmy

multiple invertersfrequency
1713772042005.png (103.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Jimmy Henningsson

They do frequency shift but not with ESS assistant. They are too old for that. The chip number is where the capability is assessed.

But HQ13 will be the older processors that dont play with the newer features. They would be more the ones that use HUB. There is hub 4 as well. Chosen based on needs. And all depreciated.

Section in the ESS manual comparison.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jimmy-henningsson avatar image jimmy-henningsson commented ·

Thanks for the information.

Does HUB-4 also work off grid?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic