question

baksteen avatar image
baksteen asked

Possible expansion of RV setup

Hi everyone,


I recently purchased a selfbuilt campervan (not built by me). The current setup i feel it already pretty nice but I want to look into the possible options I have to add more power.

The camper runs fully electric, meaning water heater and cooking is done on electricity. I have found that incase of dissapointing availability of sunshine the battery might drain rather fast.


What options do I have to possible help this?

Here is the current setup:

  • MultiPlus IP22 12/2000/80-32 230V VE.Bus
  • Victron lithium accu 12,8V/160Ah Smart
  • Victron Lynx Smart BMS 500
  • Victron Lynx Distributor
  • Victron Cerbo GX
  • Cerbo GX Touch 50
  • Victron BlueSolar MPPT 100/50 (12/24V)
  • 4x Victron Solar Panel 140W Mono


Thanks for any help.

offgridcampervan
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Duivert NL avatar image
Duivert NL answered ·

Hi the obvious thing to do is increase battery storage, and if you can more / higher ouput solar panels with a another mppt

6 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

borealcampers avatar image borealcampers commented ·
160A of battery capacity is on the light side for an camper van that runs everything on electricity (cooking as well as water heating).

As a first step I would upgrade the battery capacity, and replace the water heateer with one that uses the engine coolant to heat water.

0 Likes 0 ·
Show more comments
baksteen avatar image
baksteen answered ·

Hi everyone,

I wanted to revisit this post to provide an update and ask for some more advice.

I looked into the options provided above and found that other solar panels are not an option. Panels with a higher WP also come with a larger size. I was unable to find a suitable setup with the space available on top of the Ducato.

I was able to find a "second hand" 160 ah Victron Smart battery. I will be using this one to double the battery capacity of the van. We are opting for this because we found that when the weather is not optimal, we drain the battery too fast when cooking using induction en/of using the water heater. We would really not be able to do a single off grid day with limited sun.

I am not an electriction (my FiL is and he will be helping) and have been reading online about how to best tackle this. I would like some advice.

Am I correct that I need to isolate both batteries first and charge them to 100% before connecting them in serie?

Is there anything else I need to consider?


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Offgrid page

Additional resources still need to be added for this topic