This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
3xMP2 5k ESS, Gobel Battery, Cerbo, RS450/100, DC coupled PV feed is activated
RS should bring all of the PV power into DC, MP should charge to AC the overload.
Normally it works fine, but sometime the RS stops charging, both Strings on 0W sits on -11W, stays there for up to 1h , ramps 30W up and down and then starts again powering DC with full PV power.
This is in my opionion not a normal behavior.
You have PV inverters on both AC in and out, perhaps detail these and how they are configured. We have a German speaking section, perhaps that may help you as well if you post there.
Hi, it seams to be a DVCC/Voltage/SOC thing, the MPPT gets turned down from the system. Other people mention this also.
Is there a connection out of the forum / community to victron, that a tech would be involved?
