question

jinetenoc avatar image
jinetenoc asked

Questions about NS charging station

I am interested in installing a Victron NS charging station for electric vehicles. I currently have a Multiplus II 5000/48 inverter, a Smart Solar250/100 MPPT regulator, a Color Control and two Pylontech US 5000 batteries, all powered by an installation of approximately 4 kwp. My question is this, all of this along with the energy meter is on the third floor and the charger would be on the ground floor, what would I need to interconnect? Only Wi-Fi network or do you have to run a cable between them? Thanks in advance for your reply

ev charging station
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Only Wi-Fi, but make sure both devices are in the same network
1 Like 1 ·
jinetenoc avatar image jinetenoc Lucian Popescu (Victron Energy Staff) ♦♦ commented ·

thanks

0 Likes 0 ·
0 Answers