This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi there ;
first I do appologie for my english. I am french and it's difficult to talk about electricity
I have a three phase System at home.
I will add a victron system. I was thinking about the system that you can see on the picture. Is it all right for you? Or can I do cheaper or better?
Feel free to let me know if I did mistake. It is my first solar system
I want to have more than 10Kw of solar system
Hi you would have to use a lot more batteries then 2 us5000’s
At least 6 us5000’s or 12 us2000’s
See this guide:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
Pylontech is bull...t. Make self. Buy from alibaba 304ah cells 16pcs, aprox 2000€ 16kwh + 123Smart BMS. 60kwh is good for 3x 48/5000 multiplus 2. You have 16kwh 48v battery 2,5k€. Why this Touch GX ? Lot of money only. You see all this from lan computer, tablet, cellular. I have these and think buy + 3 Multis 48/5000. More power, +12kw.
@duivert ol I understand for the battery. I will do something else.
@Ants Kosmos I did t know that I can monitor it with LAN
But is my system allright? I live in the south of France and I would like have low power bill (stay out of grid ) .
You can check from lan Cerbo GX or install Venus os to Raspberry Pi.
This is from cellular
And all data you see in VRM portal too.
You find self battery seller ? Multiplus seller is Nkon.
Do you agree that I should have 12k watts ?
hi, what do you mean with 12kw?
my advise is to consult your local victron dealer/installer if you aren't technical enough to setup a system like this
