question

noah avatar image
noah asked

CCGX not working, AC coupled system shutdown

  • img-20240417-151238-438.jpg


Hi . I have a CCGX screen not coming up and entire quattro and fronius AC coupled will shutdown. The system started working after troubleshooting and disconnecting VE bus cable on CCGX. Presently system is working blindly, no screen to monitor. Any suggestions??

CCGX Color Control
img-20240417-151238-438.jpg (3.8 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Noah

Basically you have done this, but simpler.

Is the CCGX powering up at all? Have you checked the fuse on its power cable?

If it is totally dead the only thing to do is total replacement. Suggesting a Cerbo at least. Much faster processing then for the system and running ESS

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

noah avatar image noah commented ·
Thank you for your response @Alexandra . The power cable read 51.2v. Ethernet port still indicates green led. USB host port dead, relay port dead and I guess everything else is dead on screen. Do you think replacing with a new CCGX will suffice? If yes? Is there any way to transfer settings from old to new one.?


Kind regards

0 Likes 0 ·
Show more comments