question

johanepos avatar image
johanepos asked

Remote Configure MPPT 100/20 via Cerbo-S GX

Is it possible to remotely configure an MPPT 100/20 via Cerbo-S GX connected to the VE.Bus?

VE.Bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
johanepos avatar image
johanepos answered ·

Below screenshot from VRM:

1712673620181.png


1712673620181.png (64.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image
ejrossouw answered ·

@johanepos You can use VictronConnect connected to the internet and logged into VRM.Select VRM as opposed to local, then the installation, which will show the MPPT and that is it.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

@johan.epos@gmail.com

Link to video.

0 Likes 0 ·
johanepos avatar image johanepos klim8skeptic ♦ commented ·
Thanks, works 100%. Is it then not possible to configure from a PC?
0 Likes 0 ·
klim8skeptic avatar image klim8skeptic ♦ johanepos commented ·
@johan.epos@gmail.com Yes, use Victron Connect.
0 Likes 0 ·
Show more comments

Related Resources

What is VE.Bus?