question

tonyp avatar image
tonyp asked

Is the Batt temp sensor best connected to Cerbo or Multiplus?

If no technical reason not to I would prefer to connect to the Cerbo

Temperature Sensor
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Which temp sensor do you have? Best to connect it to the equipment it was supplied with.
1 Like 1 ·
2 Answers
Paul B avatar image
Paul B answered ·

connect it to the multiplus

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image
Alexandra answered ·

@TonyP

If you need it for temperature compensated charging or low temp cut off then connect it to the Multiplus.

If you just want stats then use the Cerbo or to trigger a fan or something

So the answer is it depends on what you need it for

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tonyp avatar image tonyp commented ·

I understood the system was clever and could uses one battery temp sensor to instruct the Multiplus and other items Throug its network?

0 Likes 0 ·
Show more comments

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor