I have a Multiplus ii 12/3000/120-50 120V controller in my Airstream Tradewind. I would like to use my Honda 2200w 20A Generator to charge the batteries when out camping but plugging the Airstream into it causes a fault.
I have tried to lower the Input Current Limit but the option is disabled (greyed out) in the control panel. I get a "This setting is disabled. Possible reasons are "Overruled by remote" is not enabled or an assistant is preventing the adjustment. Please check the inverter configuration with VEConfigure"
So I go into VRM and I set the Inverter/Charger Control to enabled. With it saying that this option allows a user to change current limits.
But even with that enabled I still cannot adjust the input current limit in the controls. It is still greyed out.
What am I missing?