Multiple EV chargers on one (Cerbo) GX system?

Hello I would like to use three Victron EV charging stations and add them to a central GX system.

Once I have added them to a Cerbo GX system that also has a grid meter configured, can the Cerbo automatically load balance the EV chargers?

So this is not only load balancing for other consuming devices behind the meter, but also load balance the EV chargers among each other

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) ♦♦ commented · Apr 02 at 07:50 PM

for now, all the EVCS will make sure that the total consumption will stay below overload value. More will be added later.

0 ·

rolandrrr Lucian Popescu (Victron Energy Staff) ♦♦ commented · Apr 02 at 08:59 PM

Hi, what do you mean by the overload value in this case?

I mean this usecase with no Multiplus present. Normally with a Multiplus, you have an input current limit. And the configured ESS can work with that.
Now, there needs be a different place to put this limit, when you only have Cerbo+grid meter+several EV chargers.

You might not even have a grid meter, and already be able to set a limit for all of the EV chargers combined?

0 ·