question

Volker avatar image
Volker asked

EM24 TCP grid meter => lost connection to ESS system

Hello all,


I'm running an ESS system (Multiplus-II + Pylontech) with an EM24 TCP grid meter.
So far for 1yr+ with no issues at all.

Since last night the Grid meter is gone from the dashboard and the Multiplus in passthrough.
- In the VRM Device list the Grid meter shows "last seen 8 hrs ago"
- In the Remote console device list ist shows as not connected
- when trying to add the device again using settings=>Modbus devices => scan the meter is not found
- the meter itself has a fixed IP address and is pingable and shows up in my network

Now I tried to update the EM24 firmware to from 1.7.3 to 1.8.3 as described in a previous post here, but I could not connect using the Carlo Gavazzi tool: "Status: Connected" but when clicking on the connection I get "unable to resume this conenction" Then Status toggles to "Unconnected". Manual connection via IP address also does not work.

cg-ucs-1.png

cg-ucs-2.png

Maybe someone has a suggestion how to proceed from here?

Thanks, kind regards and a nice Easter,

tullsta

ESSem24TCP IP Networking
cg-ucs-1.png (7.4 KiB)
cg-ucs-2.png (7.2 KiB)
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image Duivert NL commented ·

instead of network connection you could connect it to the CG software by RS485 if you have a cable for it


and have you tried powered it off for a while before connecting to CG software?

tried a different network cable?

0 Likes 0 ·
Show more comments
3 Answers
Duivert NL avatar image
Duivert NL answered ·

maybe the EM24 needs a newer firmware version to solve the problem?

see: https://community.victronenergy.com/questions/66501/em24-ethernet-support-nightmare.html

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Volker avatar image Volker commented ·
Hello Duivert,


thanks for your effort! I tried that already but unfortunately without success: cannot get the EM24 in an updateable connection using the CG Universal configuration Software.

=> updated teh description above.

Thanks + kind regards - tullsta

0 Likes 0 ·
Volker avatar image
Volker answered ·

Hello - a short status update:

after resetting the EM24 I could connect again to the EM24 and update FW to 1.8.3 without issues.
It was a actually matter of minutes

The only thing I would have hoped is that a FW-driven device like the EM24 has different means to reset rather than disconnecting mains. At least I know now that also here an externally accessibel fuse holder would have had its purpose...

Thanks again @duivert for your immediate weekend-help!

veel dank en vriendelijke groet

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Duivert NL avatar image Duivert NL commented ·
Bit late, but glad to hear its working again!
0 Likes 0 ·
ted avatar image
ted answered ·

No need to reset or turn off the em24. Your can simply switch the em24 port from 501 to 502 and rescan, this will work too if this problem should happen again (but since 1.8.3 it seems stable)


1713807934320.png


1713807934320.png (35.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

What is ESS training video

ESS Quick Installation Guide

ESS design and installation manual

Additional resources still need to be added for this topic

Energy Meter Manual EM24 RS485

Additional resources still need to be added for this topic