When the opportunity arose for me to equip our 128-year-old historic vessel Vega with a Victron charger / inverter I was elated. Victron takes great pains to create and market good solid equipment which can be depended upon for years of trouble free service. Hats off to a great team. Each individual module comes with clear instructions on how it is to be installed. The problems arise when trying to plan or, in my case, install a system which requires, or perhaps not, several integrated elements. Try as I will I could not find pages suggesting complete systems and the elements needed for each. Example: does the MultiPlus require a V.net battery monitor module between it and the Blue Power control panel? The MultiPlus has all the same connections as the V.net battery control unit. May I suggest an interactive page on the Victron site where an interested client can "construct" their new system, see what is required and how it would be connected? Input power sources available etc and get back a visual of what is needed and how those parts would be connected. Perhaps even the ability to print out a final diagram. I see this as a great marketing tool for dealers to use when planning with a client and as a tool to attract and retain DIY clients. The technical advantages are obvious.
